FibreScan B&W

 

Fibrescan is a simple and reliable system for removal of foreign fibre and white PP contaminants in cotton Blowroom lines.

Fibrescan B & W is a Multi Camera Sensor based technology working on the principle of monochromatic light intensity variation.Multiple miniature camera sensors interlaced with advanced DIPT (Digital Image Processing Technology), PMAC (Pixel Mapping Across Camera Sensors) and PABE (Pilot Air Boosted Ejector) are at the core of Fibrescan. DIPT, PMAC and PABE together enhance the effectiveness of the equipment and provide the best efficiency among this technology machines.

 

Features

    •  Multi Camera Sensor one for every 65mm of duct width.
    •  DIPT - Digital image Processing Technology for optimum detection of Contaminants
    •  PMAC - Pixel Mapping Across Camera Sensors
    •  Very low clean cotton ejections typically 0.5% for 40 Ejections / Minute.
    •  Hybrid Embedded Controller enhances reliability.
    •  Easy to Clean and Maintain, No PC Needed.

Fibrescan B & W with U-Sonic (GA Drawing)

Technical Specifications

Description FibreScan B & W
Sensing Technology Multi Camera Sensor Array Based
Processing DIPT - Digital Image Processing Technology
PMAC - Pixel Mapping Across Camera Sensors
PABE - Pilot Air Boosted Ejector
Type and No of Cameras 32 ( 16 * 2 Camera Sensor - Both side )
Resolution 2048 * 1 ( Each Camera 128 Pixels )
Camera Scanning Speed (LPS) 7000 Lines per second
White PP Detection Ultra - Sonic Principle (U-Sonic)
Reflection Direct to Opaque Sheet
Ejection Solenoid High Speed with Precise ON / OFF response
Production Capacity

Throughput Duct Size

Size of Machine

No of Ejection Valve
600 Kgs/Hr

880*100 mm

2650 x 1350 x 1000 mm

22 Nos
800 Kgs/Hr

1040*100 mm

2400 x 1350 x 1000 mm

26 Nos
1000 Kgs/Hr

1400*100 mm

2400 x 1750 x 1000 mm

32 Nos
1200 Kgs/Hr

1400*120 mm

2450 x 1750 x 1000 mm

32 Nos
Ejection Waste % Below 0.5% - 1% Maximum 40 Ejections / Min
Sensitivity Setting On Area, Vertical and Horizontal Sizes
Diagnostics Camera Sensor, Ejection Valve & Lighting Hours
Display Features Minute, Hourly, Daily & Monthly Ejection Graphs
Tube Light Nos and Wattage 12 Nos ( 6 * 2 - 28 Watts ) Day light
Control System Dedicated Embedded Controller
Operator Interface HMI on Mc and also Web Interface on remote PC
Power Consumption 1 Kw + Fan
Power 415 Volts 3 Phase 50 Hz
Ejected Material Collection EMCH - Ejected Material Collection Hanger - Optional
Booster Fan for Ejected Material Booster Fan based on Feed Mc Specs
Ejected Cotton Grams / Ejection 0.5 Grams / Ejection after Fine Cleaner
0.9 Grams / Ejection after Coarse Cleaner
Compressed Air Requirements 3 - 4 CFM based on 40 Ejections / Min @ 6.5 Bar