FibreScan Pearl 2

Fibrescan is a simple and reliable system for removal of foreign fibre and white PP contaminants in cotton Blowroom lines.
Fibrescan Pearl 2 is a Multi-Camera Sensor based technology working on the principal of monochormatic light intensity
variation for color detection and spectral imaging.

Multiple miniature camera array sensors interlaced with advanced technology are at the core of FibreScan.

* DIPT  (Digital Image Processing Technology),
* PMAC (Pixel Mapping Across Camera Sensors) and
* PABE  (Pilot Air Boosted Ejector)

DIPT, PMAC, PABE in combination enhance the effectiveness of
the equipment and provide the best efficiency among this
technology machines in the world.

Features
    • Multi-Camera Sensor one for every 65mm of duct width.
    • DIPT - Digital Image Processing Technology for optimum
      detection of Contaminants.
    • Very low clean cotton ejections typically 0.5% for 50 Ejections / Minute.
    • Hybrid Embedded Controller enhances reliability.
    • Easy to clean and Maintain, No PC Needed.

Fibrescan Pearl 2

Technical Specifications

Description FibreScan Pearl 2
Sensing Technology MultipleTech with Daylight Camera Array Sensing & UV Spectral Imaging and U-Sonic for Reflective Transmittance detection
Processing Embedded Controller with
DIPT - Digital Image Processing Technology
PMAC - Pixel Mapping Across Camera Sensors
PABE - Pilot Air Boosted Ejector
Type and No of Cameras Multiple Camera Array Sensors - 64 Nos MonoChrome
Daylight Camera Array Sensor
UV Spectral Imaging Camera Array Sensor
Resolution 2048 * 1 with 128 pixels for each camera
Camera Scanning Speed (LPS) upto 12000 LPS for Camera Sensor Array
White PP Detection Ultra - Sonic Principle (U-Sonic) & UV Spectral Imaging
Ejection Solenoid Ultra Quick PABE Ejector with Sub 7Ms Response for Both on and Off
Production Capacity 800 / 1000 Kgs / Hour
Throughput Duct Size 1040 * 100 mm
Size of Machine 2670 x 1350 x 1000 mm
No of Ejection Valve 26 Nos
Ejection Waste % Below 0.5% - 1% Maximum 50 Ejections / Min
Sensitivity Setting On Area, Vertical, Horizontal Sizes &
Size Wise Color Selection Settings
Diagnostics Camera Sensor, Ejection Valve & Lighting Hours, Intensity and Performance Graphs
Display Features Comprehensive for both Camera Array Sensor & UV Camera Array Sensor
Tube Light Nos and Wattage 12 Nos ( 6 * 2 - 28 Watts ) Day light &
12 Nos ( 6 * 2 - 36 Watts ) UV light
Control System Dedicated Embedded Controller for Camera Array Sensor, UV Spectral Imaging & U-Sonic
Operator Interface HMI and Console on Mc and Also Web Interface on remote PC
Power Consumption 2 Kw + Fan
Power 415 Volts 3 Phase 50 Hz
Ejected Material Collection EMCH - Ejected Material Collection Hanger - Optional
Booster Fan for Ejected Material Booster Fan based on Feed Mc Specs
Ejected Cotton Grams / Ejection 0.5 Grams / Ejection after Fine Cleaner
0.9 Grams / Ejection after Coarse Cleaner
Compressed Air Requirements 3 - 4 CFM based on 50 Ejections / Min @ 6.5 Bar